Characterization by Stm and Electrical Conductivity of Single-Walled Carbon Nanotubes

Abstract

Single-walled carbon nanotubes (SWCNT) prepared by a DC-Arc-Discharge and purified by a hydrothermal treatment followed by several steps of procedures including heating, burning, extracting and acid-washing are investigated by a conventional STM technique morphologically and spectroscopically. The electical resistivities of compacted pellets (mats) of SWCNT are measured as a function of temperature in the range from the room-temperature to 1.5K. The behaviors seems to be essentially originated in the metallic nature of individual SWCNT.     

Piezoresistivities of vapor‐grown carbon fiber/silicone foams for tactile sensor applications

Due to the growing demand for tactile sensors, the possibility of detecting an external uniaxial pressure by the piezoresistive measuring of a conductive filler/elastomer composite was investigated. A series of piezoresistive models are discussed. Novel highly sensitive piezoresistive foams with excellent elasticity were fabricated using vapor‐grown carbon fiber (VGCF), two‐component silicone elastomer and a new type of thermally expandable micro beads foaming agent to overcome the disadvantages of the silicone elastomer in the utilization of a tactile sensor. Deformations of the foams caused by uniaxial pressure were observed using scanning electron microscopy from cross‐sections. Effects of the VGCF and the foaming agent on the piezoresistivitiy were investigated. The piezoresistive mechanisms of the foams are discussed according to the measurements, and good fit was found between the theoretical calculations and the experimental piezoresistivity measurements. It is found that the addition of the micro beads foaming agent can improve the piezoresistivity of the VGCF/silicone foam and increase the sensitivity and repeatability for its application in a tactile sensor. © 2016 Society of Chemical Industry     

Quantum discord for two-qubit systems in the Bloch channel: effects of longitudinal and transversal relaxation times

Quantum discord is studied for two-qubit systems with different settings under the influence of the Bloch channel which is characterized by the longitudinal and transversal relaxation times and the environmental temperature. The relaxation of the quantum discord strongly depends on the ratio of the two relaxation times and the environmental temperature. It is found that the ratio of the quantum discord to the total correlation becomes finite or zero asymptotically, depending on the ratio of the relaxation times and the system setting. Furthermore, the optimal setting for sharing the quantum discord is discussed for given environmental temperature and ratio of the relaxation times.     

Study of Cuprate Superconductivity Using the Particle Number Conserving Bogoliubov-de Gennes Equations: ARPES and STS Images From Surface Plus Bulk Layers Model

Journal of Superconductivity and Novel Magnetism - We theoretically study the superconductivity in hole-doped cuprate superconductors by employing a model composed of surface and bulk CuO $$_2$$...     

Well‐Defined Functional Linear Aliphatic Diblock Copolyethers: A Versatile Linear Aliphatic Polyether Platform for Selective Functionalizations and Various Nanostructures

Low‐temperature anionic ring‐opening homopolymerizations and copolymerizations of two glycidol derivatives (allyl glycidyl ether (AGE) and ethoxyethyl glycidyl ether (EEGE)) are studied using a metal‐free catalyst system, 3‐phenyl‐1‐propanol (PPA) (an initiator) and 1‐tert‐butyl‐4,4,4‐tris(dimethylamino)‐2,2‐bis[tris‐(dimethylamino)phosphoranylidenamino]‐2Λ⁵,4Λ⁵‐catenadi(phosphazene) (t‐Bu‐P₄) (a promoter) in order to obtain well‐defined functional linear polyethers and diblock copolymers. With the aid of the catalyst system, AGE is found to successfully undergo anionic ring‐opening polymerization (ROP) even at room temperature (low reaction temperature) without any side reactions, producing well‐defined linear AGE‐homopolymer in a unimodal narrow molecular weight distribution. Under the same conditions, EEGE also undergoes polymerization, producing a linear EEGE‐homopolymer in a unimodal narrow molecular‐weight distribution. In this case, however, a side reaction (i.e., chain‐transfer reaction) is found to occur at low levels during the early stages of polymerization. The chemical properties of the monomers in the context of the homopolymerization reactions are considered in the design of a protocol used to synthesize well‐defined linear diblock copolyethers with a variety of compositions. The approach, anionic polymerization via the sequential step feed of AGE and EEGE as the first and second monomers, is found to be free from side reactions at room temperature. Each block of the obtained linear diblock copolymers undergoes selective deprotection to permit further chemical modification for selective functionalization. In addition, thermal properties and structures of the polymers and their post‐modification products are examined. Overall, this study demonstrates that a low‐temperature metal‐free anionic ROP using the PPA/t‐Bu‐P₄ catalyst system is suitable for the production of well‐defined linear AGE‐homopolymers and their diblock copolymers with the EEGE monomer, which are versatile and selectively functionalizable linear aliphatic polyether platforms for a variety of post‐modifications, nanostructures, and their applications.     

Production of Gentiobiose from Hydrothermally Treated Aureobasidium pullulans β-1,3-1,6-Glucan

We report production of the functional disaccharide gentiobiose β-D-Glcp-(1→6)-D-Glc by a hydrolysis reaction of hydrothermally treated Aureobasidium pullulans β-1,3-1,6-glucan as the substrate and Kitalase as the enzyme. Gentiobiose was produced over the pH range 4−6 and the concentration of gentiobiose produced decreased above pH 7. The maximum value of gentiobiose production was unaffected by the enzyme concentration. The maximum concentration of gentiobiose produced was dependent on the substrate concentration whereas the maximum ratio of gentiobiose to glucose was not. The production of gentiobiose from yeast β-1,3-1,6-glucan was lower than that from A. pullulans β-1,3-1,6-glucan.     

Sieving of aerosol particles with metal screens

Metal screens with uniform micrometer-sized opening were employed to sieve aerosol particles by suppressing the adhesion of particles smaller than the openings. The collection efficiencies of monodispersed polystyrene latex (PSL) particles were experimentally determined using the metal screens with 1.2, 1.8, 2.5, and 4.2 μm openings at various filtration velocities. The particles smaller than the mesh opening adhered on the metal screen at a low filtration velocity, but the bounce-off of particles on the mesh surface suppressed the adhesion at a high velocity. As a result, we found that the adhesion of PSL particles larger than 0.3 μm mostly suppressed at a filtration velocity higher than 10 m s^?1 and therefore we can sieve aerosol particles according to the opening size of metal screens. We also found that the particle number concentration could be determined by measuring the increase in pressure drop since the clogging of metal screen openings takes place by the individual particles.

© 2016 American Association for Aerosol Research